Dorit DR-165K+QC Fiber Optic High Speed
6 Hole Quick Coupling Handpiece
Advantage
1. German ceramic ball bearing; open style cartridge
2. Triple spray, effective cooling for bur and treating contact surface
3. Push button type to change bur, easy and convenient
4. KAVO type 6 holes ISO Standard quick coupling, easy to exchange handpiece for dentist and improve working efficiency
5. Fiber optic light source, Japan imported LED lamp, endurance of sterilization under high temperature and high pressure
6. sterilized in 135℃ to avoid cross-infection.
7. Streamlined design, comfortable for hand feeling, easy to clean
Technical Data
| | Triple spray 3 way spray 3 air 2 hole / 4 hole 2 hole / 4 hole 2 hole / 4 hole |
| | |
| | |
| Chuck type | Push button |
| Noise | ≤60dB |
| Head Diameter |
Φ12.5mm(torque)/ Φ10.8mm(standard) |
| Bur applicable |
Φ1.59mm-Φ1.60mm*21mm-23mm(diameter*length) |
| Rotation speed |
300,000~350,000rpm(Torque); 350,000~420,000rpm(Standard) |
| Head height | 13.1mm(Torque)/13.0mm(Standard) |
| Power | 22W(standard); 25W(torque) |
| Light brightness | 25500lux |
Steps for disinfection of dental turbine handpieces
1. First remove the diamond burs , and clean up all the teeth on dental handpieces precipitate
2. Use a metal needle to clean the spray holes and fumaroles
Note: The spray holes and diamond burs into 40 -degree angle , fumaroles and diamond burs to a 30 degree angle
3. Place the clean lubricating oil is sprayed into the axial hole 1-2 seconds ( diamond burs is plugged holes )
4. In the bottom of the handpiece were ( with / without quick connector ) two kinds of styling , make the right amount of lubricant is injected into the bottom
5. The handpiece with quick connector combination ( first determine the water switch is turned off )
6. Replace the diamond burs , surrounded by white silk cloth handpiece head ( make sure the needle does not touch the diamond burs and white gauze , so as not to tie )
7. pedal depressed for about 20 seconds , look at whether there is in white gauze on any stain. If there are stains on the white gauze , again, add oil , starting from item 4 continued routine maintenance , know that white gauze until no stain
8. Finally, no more than 135 degrees Celsius temperature and high pressure sterilization
Our services:
1.100% pre-tested before delivery.
2.1:1 replacement for any defective caused by our factory.
3. Specialized in exporting dental equipment with professional sales team.
4. Excellent customer service and technical support.
Product image
Product Tags:
|
|
Dorit DR165K QC Fiber Optic High Speed Handpiece 6 Hole Fast Handpiece Dental Images
|
